top of page

Chrüterei Stein Gruppe

Öffentlich·324 Mitglieder
Lloyd Phillips
Lloyd Phillips

Buying New Interior Doors

Choosing new doors for your home is an exciting and important decision. So if this is your first time, you've come to the right place. Since each door and opening may have different dimensions and requirements, we have structured our site to allow you maximum flexibility.Scroll through our site until you find the design you love. You may narrow your search by wood species, door size, collection, or door model. Click on the desired door to view prices, options and additional information.Prices shown are usually for "slab" doors unless otherwise noted. Some doors are shown stained, but are sold unfinished or primed unless otherwise noted.

buying new interior doors


To protect public health, safety and general welfare, doors must conform to codes and standards from a local council. Please check with your local council if your door needs to be fire safety, impact resistance or windstorm rated.

Door slab is a door and nothing else: no frame, hardware, and the door is NOT prepped for hinges or a handle.It is up to the buyer to attach the door slab to an existing frame or to create a new door frame.Door slab installation - interior door slabs are more forgiving for less-than-perfect installations, as you do not have to worry about weather tightness.Therefore, we always recommend buying exterior doors pre hung as they come weather tight off the shelf.When considering buying a door slab, check your door thickness in addition to the width and height as doors range from 1-3/8" - 2-1/4" in thickness.

  • Prior to ordering a pre hung unit know the following:Door Swing - determine the handing and swing direction of the door. Most residential entry doors will open in to the house, refereed as in swing.

  • Rough Opening is an unfinished wall opening where a door with the frame will be installed. The frame with add to the total width and height of the door unit. Make sure you got the right size opening.

  • Wall thickness - the jamb must cover the thickness of the wall. Make sure to select the right size. The most common size for 2x4 framing is 4-5/8" and for 2x6 is 6-5/8".

Selecting a factory finish option will produce a door unit with a beautiful, protective finish that promotes long life, beauty, and accentuates the natural allure and texture of the wood grain.For best results our doors are pre finished by the manufacturer. Colors shown may vary from actual application due to uncontrollable factors such as the lighting in your room and monitor settings.Factory finish doors are custom made and CANNOT be returned. You need to be certain that any slight variations occurring between the actual color, and the representation on our website must be accepted.Some manufacturers offer color samples, please call customer service and order to order a sample.

  • One of the most important steps in the selection process! Protecting you door properly and selecting the right door type can lower maintenance, improve performance and extend the life of your door.Factors to consider when selecting a door:Exposure - Doors facing south or west receive the most sun and require the most protection. Dark colors and/or storm doors can be harmful in these applications if not protected by a six to eight foot overhang.

  • Overhang - Every exterior door needs protection to perform properly and extend it's life. The more exposure to elements, the larger the overhang. Please refer to the manufacturer's warranty and guidelines for details and requirements.

  • Color Choice - Your choice of colors are also dictated by exposure. Light colors reflect heat and dark colors absorb heat. Please use caution in this area.

  • Storm Doors - Storm doors can be helpful in the right application and harmful in the wrong one, mainly with wood doors. Heat build up behind a storm door can exceed 120 degrees in some exposures and damage your new door.

Hollow-core flush doors, installed in millions of homes for the past 50 years, are lightweight, low-cost versions of the flush door. These have an inner softwood frame surrounding cardboard honeycomb cores, and are faced with thin wood veneers. They are damaged relatively easily and allow considerable sound transfer.

You can also buy molded fiber composite doors. These are extremely durable and dimensionally stable. And some are designed to meet specific needs. For example, the composite door shown below is made to maximize sound control.

Interior doors are sold pre-hung in frames or as doors only, called blanks or slabs. The latter type are for hanging in existing door frames or for mounting in a situation where the interior carpenter is up for the challenge of building the entire jamb set. They are sold without hinges, knobs, or locksets, but they may be ordered with a hole pre-bored for the lockset.

Pre-hung doors are the preferred choice in most situations because of the labor they save. The door comes mounted to a jamb set, with hinges mortised into the edges. When ordering this type, you specify the surface-to-surface thickness of the wall and the size and location of the holes for the lockset.

There are several types of interior doors, distinguished by the way they operate. Regardless of the type of doors, the frames are built basically the same, with the exception of pocket doors (see below). The frame consists of jambs, a casing, stops, a sill, and a threshold. The jambs form the sides and head of the frame, and the casing is support for the jambs. The stops are wood strips against which the door fits when closed.

Hinged doors are the standard in every home. Conventional hinged doors may be either right or left handed. A door that opens toward you and has the door knob on the right is right handed. A door hinged on the opposite side is left handed.

Of course, when choosing an interior door, no rule dictates what it should look like. In fact, there are many popular styles for interior doors that fit different design aesthetics, look amazing, and profoundly impact the look and feel of a room.

Take three measurements inside the door frame \u2013 at the top, middle and bottom. The widest measurement determines the width of the door.\\n\\nUse a tape measure to understand the width of the three areas of the door frame. Run the tape measure along the width of the frame from the left to the right and record these numbers.\\nThe standard UK widths of doors are: 24 inches\\\/610 mm, 27 inches\\\/686 mm, 30 inches\\\/762 mm, 33 inches\\\/838 mm.\\n\\n" }], "image": "@type": "ImageObject", "url": " -content/uploads/2021/11/Door-measurement-250px.jpg", "width": "250", "height": "558" }, "@type": "HowToStep", "url": " -centre/how-to-door-guides/how-to-measure-up#step2", "name": "Measure the door height", "itemListElement": [ "@type": "HowToDirection", "text": "Measure the inside of each vertical side of the frame. The longest length determines the height required. Remember to make allowance for any floor covering.\\n\\nUse a tape measure to understand the height of the door frame. Run the tape from the top corner to the bottom corner on each side and record the number of the longest length.\\nRemember to take into consideration that this could be a job where you will need to stand on something like a chair to reach the top of the frame, it might be an idea to make sure a family member or friend is helping you when you take these measurements.\\nThe standard UK height of doors is most commonly 6\u20196\u201d\\\/1981mm but some may also be 2040mm.\\n\\n" ], "image": "@type": "ImageObject", "url": " -content/uploads/2021/11/marking_up_door_alterations.jpg", "width": "853", "height": "480" , "@type": "HowToStep", "url": " -centre/how-to-door-guides/how-to-measure-up#step3", "name": "Measure the door thickness", "itemListElement": [ "@type": "HowToDirection", "text": "If you are looking to purchase replacement doors and to keep the same frames, you will need to replicate the door thickness, so make sure to take this measurement also.\\n\\nUse a tape measure to understand the thickness of the existing door. Run the tape measure along the edge of the door and record the measurement of the thickness.\\nYou should also measure the rebate in the frame, where the door sits when closed.\\nThe recording of both measurements should be a close match and fit with one of the UK standard door thicknesses: 35 mm is the most common, but some doors may also be 40mm. NB. 45mm thickness usually refers to fire doors.\\n\\n" ], "image": "@type": "ImageObject", "url": " -content/uploads/2021/11/Mark_door_trimming_Fotolia.jpg", "width": "424", "height": "283" ], "totalTime": "P0DT01H00M00S"}For a more detailed breakdown of the most common door sizes read our explanation on UK standard door sizes. If you have non-standard door size requirements, please contact us, as bespoke sizes can be made to order for some of our door ranges.

Aside from the easy distinctions of hollow core (interior use only) and solid core, there is a seemingly limitless variety of door styles available. Even a casual quick internet search offers a huge selection from which to choose.

US Door & More Inc. Brings Out Amazing Collections of Residential Doors at a low cost. People these days leave no stone un turned to make their home interiors enormously beautiful with high-quality fixtures and other decorative accessories. One effective way to beautify your home from inside as well as outside is to use custom doors in a variety of sizes, styles, and artworks. If you seek wood doors or double doors of the highest quality, US Door & More Inc. is the company to consider for all your purchases.

When you repair your apartment, office or country house, it is desirable to sustain each detail in the conceived style. But also it should be functional and durable. Especially it concerns interior doors - in fact they have a considerable daily load. Experts say that the majority of buyers of interior doors are guided by the appearance of the product; some are not interested in materials of manufacture and other features. 041b061a72


Willkommen in der Gruppe! Hier können sich Mitglieder austau...


  • Lynn Blattmann
  • Ojasvi Jain
    Ojasvi Jain
  • Timothy Long
    Timothy Long
  • Augustus Cuthbert
    Augustus Cuthbert
  • DaVegasIndia
bottom of page